civil engneering

 What is civil engneering? 

Structural architects are the logical personalities behind the manner in which our cutting edge towns and urban areas work. Answerable for framework for an enormous scope, structural specialists are engaged with the plan and improvement of everything from the new town corridor to cross country energy supply. 

Joining their hypothetical and down to earth information on designing, these exceptionally specific specialists need to dominate the arranging, planning, the executives, and investigation of ventures enormous and little. 

Utilizing your regular interest, your ability with Lego or Meccano, and your scholastic psyche, a degree in structural designing will prepare you for a wide scope of professions. From the involved commonsense positions to the seriously hypothetical assignments, structural designing is an order that is both fulfilling and testing in equivalent measure. 

• 
  
  
  
  

quesions o f structure 22222

 ;;;;;;;;;;;. What’s the slope of Staircase?

A. As per IS 456, the slope or pitch of stair should

be between 25 degrees to 40 degrees.

;;;;;;What do you mean by the moment of inertia?

 A quantity expressing a body’s tendency to resist

angular acceleration, which is the sum of the

products of the mass of each particle in the body

with the square of its distance from the axis of

rotation.

. What is a crank length in the slab?

 The crank length in Slab is 0.42 D. Where D is

Depth of Slab- Top cover – Bottom Cover.

;;;;;;. What are the types of a slump?

A. True Slump: The concrete mass after the test when slumps evenly all around without disintegration is called the true slump.

*Shear Slump: When one-half of the concrete mass

slide down the other is called the shear slump. This type of slump is obtained in a lean concrete mix.

*Collapse Slump: When the sample is collapsed due to adding excessive water, it is known as collapse slump.

*Zero Slump: For very stiff or dry mixes it does not

show any changes of the slump after removing the

slump cone.

''''''' What is honeycomb in concrete? How is it

formed? How to eradicate honey comb in concrete you can get in next page......... thankyou

Construction engineering Questions with Answers

👉Construction engineering Questions with Answers Part 1 

.

Q1. What is the Unit Weight of concrete?

A:- The unit weight of concrete depends on the type of a

ggregates and amount of voids. As per IS : 456-200 Unit weight of PCC is 24KN/m3 and RCC

is 25KN/m3

Q2. What is the unit weight of Steel?

A. The unit weight of Steel is 78.5KN/m3

Q3. What are the Nominal Concrete Mix proportions

for different grades:

A. Important: C-15 - 1:2:4 and C-5 - 1:4:8,C-20 and C-25 - 1:2:3,

(Cement:Sand:aggregate)

Q4. What is ductility?

A. Ductility is the Ability to deform under tensile

stress.

Q5. How to find the weight of steel bar used in

reinforcement?

A. Weight of Bar in kg/m = Dsquare/162.2 D- Dia

of bar in mm

Q6. What’s the difference between one-way slab

and two-way slab?

A. One way slab: Ratio of Longer Span / Shorter

span > 2 Two way slab: Ratio of Longer span/ shorter span <= 2

Q7. What is flat slab?

A. The slab which is supported on columns (Flab slab don’t have beams)

Q8. What do you mean by One storeyed, Two

storeyed building?

A. The building which has two floors is called two

storeyed building.

Q9. What’s the height of each floor?

A. 3m

Q10. What’s the length of rise and tread in Stair

case?

A. Rise – 150mm to 200mm, Tread – 250mm to 300mm                  is there question write as coment................................................ read                              thank yuo